- PowerScore Staff
- Posts: 5972
- Joined: Mar 25, 2011
- Sun Mar 29, 2009 6:16 pm
#85962
Setup and Rule Diagram Explanation
This is a Grouping: Defined-Fixed, Unbalanced: Overloaded, Identify the Templates game.
This game is widely regarded as the most difficult game on the October 1999 LSAT. The initial
scenario and the fourth rule establish the basic setup for the game: The first rule establishes that neither mannequin wears all three colors: Of course, because mannequin 1 already wears the red tie, the rest of mannequin 1’s outfit will be
red and navy, or red and yellow. More on this later.
The second rule indicates that each individual mannequin wears a different colored hat and jacket: The third rule indicates that mannequin 2 wears a navy skirt: A logical starting point for our inference analysis is the skirt of mannequin 1. Because mannequin
2’s skirt is navy (and there is only one navy skirt, so mannequin 1 cannot wear a navy skirt), the skirt
of mannequin 1 must be red or yellow: This inference, when combined with the first two rules, results in a situation where:
1. If the skirt of mannequin 1 is yellow, then either the jacket of mannequin 1 is red and the
hat of mannequin 1 must be yellow, or the jacket of mannequin 1 is yellow and the hat of
mannequin 1 must be red;
2. If the skirt of mannequin 1 is red, then the jacket and hat of mannequin 1 is some
combination of red and yellow or of red and navy.
Because the options for the jacket and hat of mannequin 1 are restricted according to the color of the
skirt of mannequin 1, one approach is to Identify the Templates:
When mannequin 1’s skirt is yellow: Under both scenarios, the jacket and hat on mannequin 2 are locked into a dual-option, which is
represented by the two blocks and the slash. For example, in Template #1 if the jacket of mannequin 2
is navy, then the hat of mannequin 2 is red.
Of course, mannequin 1’s skirt does not have to be yellow, and could be red instead:
When mannequin 1’s skirt is red: This second set of templates is very open, but still quite useful. If you feel that those two templates
are insufficient, you could instead show the four basic possibilities when the skirt of Mannequin 1 is
red. We’ll show those possibilities for demonstration purposes: While we have shown these last four possibilities under Templates #3 and #4, it is not essential that
you do so, because it can be a bit too time-consuming (not to mention that space is limited in this
game because the seven questions take up so much room). The basic template approach is sufficient.
This is a Grouping: Defined-Fixed, Unbalanced: Overloaded, Identify the Templates game.
This game is widely regarded as the most difficult game on the October 1999 LSAT. The initial
scenario and the fourth rule establish the basic setup for the game: The first rule establishes that neither mannequin wears all three colors: Of course, because mannequin 1 already wears the red tie, the rest of mannequin 1’s outfit will be
red and navy, or red and yellow. More on this later.
The second rule indicates that each individual mannequin wears a different colored hat and jacket: The third rule indicates that mannequin 2 wears a navy skirt: A logical starting point for our inference analysis is the skirt of mannequin 1. Because mannequin
2’s skirt is navy (and there is only one navy skirt, so mannequin 1 cannot wear a navy skirt), the skirt
of mannequin 1 must be red or yellow: This inference, when combined with the first two rules, results in a situation where:
1. If the skirt of mannequin 1 is yellow, then either the jacket of mannequin 1 is red and the
hat of mannequin 1 must be yellow, or the jacket of mannequin 1 is yellow and the hat of
mannequin 1 must be red;
2. If the skirt of mannequin 1 is red, then the jacket and hat of mannequin 1 is some
combination of red and yellow or of red and navy.
Because the options for the jacket and hat of mannequin 1 are restricted according to the color of the
skirt of mannequin 1, one approach is to Identify the Templates:
When mannequin 1’s skirt is yellow: Under both scenarios, the jacket and hat on mannequin 2 are locked into a dual-option, which is
represented by the two blocks and the slash. For example, in Template #1 if the jacket of mannequin 2
is navy, then the hat of mannequin 2 is red.
Of course, mannequin 1’s skirt does not have to be yellow, and could be red instead:
When mannequin 1’s skirt is red: This second set of templates is very open, but still quite useful. If you feel that those two templates
are insufficient, you could instead show the four basic possibilities when the skirt of Mannequin 1 is
red. We’ll show those possibilities for demonstration purposes: While we have shown these last four possibilities under Templates #3 and #4, it is not essential that
you do so, because it can be a bit too time-consuming (not to mention that space is limited in this
game because the seven questions take up so much room). The basic template approach is sufficient.
You do not have the required permissions to view the files attached to this post.
Dave Killoran
PowerScore Test Preparation
Follow me on X/Twitter at http://twitter.com/DaveKilloran
My LSAT Articles: http://blog.powerscore.com/lsat/author/dave-killoran
PowerScore Podcast: http://www.powerscore.com/lsat/podcast/
PowerScore Test Preparation
Follow me on X/Twitter at http://twitter.com/DaveKilloran
My LSAT Articles: http://blog.powerscore.com/lsat/author/dave-killoran
PowerScore Podcast: http://www.powerscore.com/lsat/podcast/